Skip to main content
 
Menu
"They charge me about 50% more than your price for any sensor! For what? Betty is sending you an order for seven units." -- Russ
"Your price is half of what we were quoted from those guys in Milwaukee! Please send two BEA Falcon HM units via UPS RED." -- Tim
"The door company charged me almost $900 for one BEA Wizard!" -- Sherwood
"Very prompt e-mail follow up about my order and better than I expected shipping. Also the prices are very good." -- Jim
"Ken Nachreiner is very professional when I called about the sensor I was looking for. When I called again to check on shipping status, he was on top of it. He called me back once it was shipped. I am very happy with the professional service he has provided me, and the fast shipping. Definitely a 10 star service. Best company and best sales representative." -- Irene
"Thanks again. Great customer service." -- David

AAADM Inspection

Automatic door systems should be checked annually by an inspector who has been certified by the American Association of Automatic Door Manufacturers. Through that annual inspection, the door system can be checked for compliance with the latest industry standards. Also, automatic door systems should be given a daily safety check by premises owners. The American Association of Automatic Door Manufacturers provides details on how to conduct a daily safety check. Premises owners can use this guide to train or retrain employees to perform the daily safety checks properly. That helps assure safe operation of automatic doors. Additionally, all new sensors on pedestrian openings should also be properly adjusted by an AAADM certified inspector. If you are not a reseller or AAADM Certified, please contact us and we can provide you a list of local AAADM certified inspectors who can accurately make these adjustments to your new sensor(s). When properly installed, inspected annually by AAADM certified inspectors and safety-checked daily by premise owners, automatic doors consistently provide safe, convenient access for everyone.

DoorSensors.com

Traffic Control | Vehicle | Parking Sensors

  • INTERSECTOR Radar Sensor For Vehicle Detection

    • Lane-by-Lane Vehicle detection
    • Stop Bar Detection
    • Advanced Detection - 600'
    • SDLC Compatible
    • Drag & Drop Programming

    AVAILABLE MODELS

    E-TC-CK1-SBE-2.0
    The 2.0 model is for all non-SDLC applications and works with MS Sedco's TCIB-UNI cabinet interface cards that are available 1 or 2 slot configurations.

    E-TC-0A-SDLC
    The SDLC model is specifically intended for use with the MS Sedco HUB that serves as an intelligent interface to any SDLC cabinet.

    Retail Price - $7000 DoorSensors.com Price - $6261

  • The VPR-27 is a radar-based motion sensor capable of detecting trail users from pedestrians to golf carts in either one direction (approach-only or depart-only) or bi-directional (two-way) up to 80 feet from the sensor’s location. The VPR-27 easily mounts to sign poles. Low power requirements (12/24V AC/DC) allow for usage in solar powered applications.

    The VPR-27 is a cost-effective way to:

    Protect trail and path users by activating flashing message or warning signs to alert motorists of approaching users at roadway crossing.

    Activate automatic overhead and roll up doors as vehicle approaches.

    Retail Price - $800   DoorSensors.com Price - $566

  • The VPR-26 is a radar-based motion sensor capable of detecting vehicles in either one direction (approach-only or depart-only) or bi-directional (two-way) up to 350 feet from the sensor’s location. The VPR-26 easily mounts overhead to traffic infrastructure such as poles, mast arms and span wires or trailer based temporary traffic control systems. Low power requirements (12/24V AC/DC) allow for usage in solar powered applications.

    The VPR-26 is a cost-effective way to:

    Remove traffic signals from recall due to malfunctioning loops.
    Activate message or warning signs.
    Activate temporary signals in work zones.
    Please note this item requires final assembly so please allow 7-10 days lead time.

    Retail Price - $1000 DoorSensors.com Price - $691

  • The Falcon is universally compatible with any industrial door. Can detect traffic moving both towards and away from your industrial door. Ability of disregarding pedestrians and only detect large masses. Capable of disregarding parallel traffic. Mounting height 11.5' to 23'. Falcon models available for lower mounting applications 7' to 11.5 and extended width pattern.

    Retail Price - $469 DoorSensors.com Price - $299.61

    Wide Pattern Version $311.61
    Easy Programming Remote Control $49
    100' Pre-Wire Cable $69

"They charge me about 50% more than your price for any sensor! For what? Betty is sending you an order for seven units." -- Russ
"Your price is half of what we were quoted from those guys in Milwaukee! Please send two BEA Falcon HM units via UPS RED." -- Tim
"The door company charged me almost $900 for one BEA Wizard!" -- Sherwood
"Very prompt e-mail follow up about my order and better than I expected shipping. Also the prices are very good." -- Jim
"Ken Nachreiner is very professional when I called about the sensor I was looking for. When I called again to check on shipping status, he was on top of it. He called me back once it was shipped. I am very happy with the professional service he has provided me, and the fast shipping. Definitely a 10 star service. Best company and best sales representative." -- Irene
"Thanks again. Great customer service." -- David

AAADM Inspection

Automatic door systems should be checked annually by an inspector who has been certified by the American Association of Automatic Door Manufacturers. Through that annual inspection, the door system can be checked for compliance with the latest industry standards. Also, automatic door systems should be given a daily safety check by premises owners. The American Association of Automatic Door Manufacturers provides details on how to conduct a daily safety check. Premises owners can use this guide to train or retrain employees to perform the daily safety checks properly. That helps assure safe operation of automatic doors. Additionally, all new sensors on pedestrian openings should also be properly adjusted by an AAADM certified inspector. If you are not a reseller or AAADM Certified, please contact us and we can provide you a list of local AAADM certified inspectors who can accurately make these adjustments to your new sensor(s). When properly installed, inspected annually by AAADM certified inspectors and safety-checked daily by premise owners, automatic doors consistently provide safe, convenient access for everyone.

Some of our Many Repeat Customers

  • ThermoFisher Scientific
  • Zircoa
  • Imerys
  • Swedish Match
  • Suisan
  • Aviagen
  • Oshkosh
  • Clorox
  • Kingsford
  • PCC Airfoils