-
The IRB-MON is a monitored, weather-proof, thru-beam infrared photoeye solution providing entrapment protection for doors, gates and barriers. The IRB-MON Safety Photo Beam is UL325-2016 compliant and housed in a rugged NEMA 4X enclosure suitable for indoor and outdoor use.
The universal design of the IRB-MON allows it to be used with a wide variety of monitored operators. Additionally, it is compatible with most non-monitored legacy products.
The IRB-MON has 4 monitoring interfaces:
Normally closed
• Two-wire pulsed (2 freq)
• Two-wire pulsed (3 freq)
• 10k resistive terminationThe IRB-MON addresses a wide variety of external entrapment protection needs due to its long range, thru beam detection technology and selectable frequency feature.
Benefits include:
Easy installation and set-up.
Robust: suitable for high-reliability entrapment protection applications.
Lens-less design minimizes fogging and false triggering and provides easy alignment.
Long operating range.
FeaturesType B1, non-contact sensor
UL325-2016 compliant
Lens-less design
Simple 2-wire connection
Relay contacts available
NEMA 4X enclosure
Selectable frequency modes
Operating Range: up to 115 ft. (35m)
Detection Angle: 24°
Sensitivity adjustment: potentiometer
Retail Price - $470 DoorSensors.com Price - $278HOT OFFER!
Order 4 or More at $252 each
Protective Hood $68 Set -
-
The IRB-RET is a monitored, weather-proof retroreflective photoeye solution providing entrapment protection for automatic gates and doors. Retroreflective configuration eliminates the need for a separate transmitter and the associated wiring across a roadway to reduce installation costs. The IRB-RET is UL 325-2016 compliant and housed in a rugged NEMA 4X enclosure suitable for indoor and outdoor use.
The universal design of the IRB-RET allows it to be used with a wide variety of monitored operators. Additionally, it is compatible with most non-monitored legacy products.
The IRB-RET has 5 monitoring interfaces:
Normally closed
Two-wire pulsed (2 freq)
Two-wire pulsed (3 freq)
Four-wire pulsed
10k resistive termination
The long range and retroreflective features provide a flexible solution to all external entrapment protection needs.Benefits include:
Selectable monitoring interface for easy set-up and installation
Compatible with many operators
Long operating range
Robust design minimizes fogging and false triggering to provide easy alignment
Mounting bracket and reflector provided
FeaturesType B1, non-contact sensor
UL 325-2016 compliant
Operating range up to 60 ft. (18.3 m)
NEMA 4X enclosure
Sensitivity adjustment: potentiometer
Retail Price - $510 DoorSensors.com Price - $286HOT OFFER!
Order 4 or More at $246 each
Steel Protective Hood for Photoeye and Plastic Protective Hood for Reflector $68 set -
-
The GD11S is a self-contained surface mount active infrared safety beam system for interior or exterior use on any automatic pedestrian door, industrial door or gate. When the infrared beam is interrupted, the GD11S’ relay output signals an industrial door or gate control to open, stop or reverse. This is now a requirement of ANSI A156.10 2005. In the event of a power loss to the GD11S, the relay changes state (failsafe). The GD11S is supplied by Erich with the GDB quick mounting brackets for easy installation on industrial doors and gates. (DB11, GD11-GDB, GD11S, GDB)
Retail Price - $240 DoorSensors.com Price - $181
-
-
Award winning industrial door activation and hold open safety device. Wired into the door controller the SentryPost will detect forklifts, pallet jacks, people and other objects. Once detection occurs the door will be sent to the open position and remain open until detection ceases. Available as stand alone 40" bollard or clamp onto existing bollard 12" versions with one (1) OR (2) safety photoeyes. Photo eyes inside the bollard are adjustable so that the detection field can be more precise. The photo eyes used can also be adjusted to detect from 1′ to 10′ away. The eyes “see” through a narrow slot at the top of the bollard, +/- 36″ above the floor. Optional flashing yellow light on top cover activates when detection occurs and has an adjustable timer relay.
-
-
DESIGNED SPECIFICALLY FOR ANSI A156.10 2005 SWING DOOR REQUIREMENTS. The RLM uses Intelligent Door Position™ monitoring circuitry to automatically identify and swing door's open and closed positions and determine its closing time. The RLM then controls the approach sensor, overhead safety sensor and safety beams. The proprietary software monitors the door's position and controls when to inhibit the signal from the overhead safety sensor during the closing cycle while simultaneously monitoring the safety beams (included) and when to prevent reactivation of the approach sensor.
Retail Price - $245 DoorSensors.com Price - $208
-
Not sure which automatic door sensor is appropriate for your application? Please contact our experienced staff with any questions.
| "They charge me about 50% more than your price for any sensor! For what? Betty is sending you an order for seven units." -- Russ |
| "Your price is half of what we were quoted from those guys in Milwaukee! Please send two BEA Falcon HM units via UPS RED." -- Tim |
| "The door company charged me almost $900 for one BEA Wizard!" -- Sherwood |
| "Very prompt e-mail follow up about my order and better than I expected shipping. Also the prices are very good." -- Jim |
| Ken Nachreiner is very professional when I called about the sensor I was looking for. When I called again to check on shipping status, he was on top of it. He called me back once it was shipped. I am very happy with the professional service he has provided me, and the fast shipping. Definitely a 10 star service. Best company and best sales representative. -- Irene |
AAADM Inspection
Automatic door systems should be checked annually by an inspector who has been certified by the American Association of Automatic Door Manufacturers. Through that annual inspection, the door system can be checked for compliance with the latest industry standards. Also, automatic door systems should be given a daily safety check by premises owners. The American Association of Automatic Door Manufacturers provides details on how to conduct a daily safety check. Premises owners can use this guide to train or retrain employees to perform the daily safety checks properly. That helps assure safe operation of automatic doors. Additionally, all new sensors on pedestrian openings should also be properly adjusted by an AAADM certified inspector. If you are not a reseller or AAADM Certified, please contact us and we can provide you a list of local AAADM certified inspectors who can accurately make these adjustments to your new sensor(s). When properly installed, inspected annually by AAADM certified inspectors and safety-checked daily by premise owners, automatic doors consistently provide safe, convenient access for everyone.
