

-
The HAWK 2 Automatic Door Sensor detects the movement of vehicles and pedestrians, and activates all types of fast and industrial gates. Utilizing the latest K-band planar microwave technology, the Automatic Door Sensor provides wide coverage and high resolution.
The Automatic Door Sensor offers three programmable motion detection options: toward, away or both. It is easy to install overhead, on either a wall or the ceiling. A versatile mechanical orientation system provides accurate positioning.
• Advanced K-band planar microwave technology
• Easy installation and adjustment
• Wall or ceiling installation
• Directional sensitivity: toward, away or both
• High coverage area resolution
• Installation height up to 6 meters (20 feet)
• Degree of protection: IP 65Retail Price - $435 DoorSensors.com Price - $286
HOT OFFER!
Order 10 or More at $269 each -
The IRB-MON is a monitored, weather-proof, thru-beam infrared photoeye solution providing entrapment protection for doors, gates and barriers. The IRB-MON Safety Photo Beam is UL325-2016 compliant and housed in a rugged NEMA 4X enclosure suitable for indoor and outdoor use.
The universal design of the IRB-MON allows it to be used with a wide variety of monitored operators. Additionally, it is compatible with most non-monitored legacy products.
The IRB-MON has 4 monitoring interfaces:
• Normally closed
• Two-wire pulsed (2 freq)
• Two-wire pulsed (3 freq)
• 10k resistive termination
• The IRB-MON addresses a wide variety of external entrapment protection needs due to its long range, thru beam detection technology and selectable frequency feature.Retail Price - $470 DoorSensors.com Price - $278
HOT OFFER!
Order 4 or More at $252 each
Protective Hood $68 Set -
The IRB-RET is a monitored, weather-proof retroreflective photoeye solution providing entrapment protection for automatic gates and doors. Retroreflective configuration eliminates the need for a separate transmitter and the associated wiring across a roadway to reduce installation costs. The IRB-RET is UL 325-2016 compliant and housed in a rugged NEMA 4X enclosure suitable for indoor and outdoor use.
The universal design of the IRB-RET allows it to be used with a wide variety of monitored operators. Additionally, it is compatible with most non-monitored legacy products.
The IRB-RET has 5 monitoring interfaces:
• Normally closed
• Two-wire pulsed (2 freq)
• Two-wire pulsed (3 freq)
• Four-wire pulsed
• 10k resistive terminationThe long range and retroreflective features provide a flexible solution to all external entrapment protection needs.
Retail Price - $510 DoorSensors.com Price - $286
HOT OFFER!
Order 4 or More at $246 each
Steel Protective Hood for Photoeye and Plastic Protective Hood for Reflector $68 set -
Designed for explosive environments, the rugged IRB-EXP photocell is used as a safety, reversing, or opening device in conjunction with automatic operators. The IRB-EXP will work with any control board that accepts dry contact on the input. The easy-to-install IRB-EXP is used with garage doors, rolling doors, parking barriers and other equipment located in explosive environments.
• NEMA 4 and 7 housing
• NEC Class I, Groups B, C & D, Class II, Groups E, F & G CSA certified, CENELEC certified, EExd IIC.
• Copper free Aluminum with Epoxy finish.
• Potentiometer range adjustment to allow more precise tuning to site.
• Through beam design is not affected by shiny surfaces.
• Modulated infrared to reduce the effect of sunlight, fog, rain, dust and dirt.
• No focusing lens.Retail Price - $2150 DoorSensors.com Price - $1146
Not sure which automatic door sensor is appropriate for your application? Please contact our experienced staff with any questions.

"They charge me about 50% more than your price for any sensor! For what? Betty is sending you an order for seven units." -- Russ |
"Your price is half of what we were quoted from those guys in Milwaukee! Please send two BEA Falcon HM units via UPS RED." -- Tim |
"The door company charged me almost $900 for one BEA Wizard!" -- Sherwood |
"Very prompt e-mail follow up about my order and better than I expected shipping. Also the prices are very good." -- Jim |
"Ken Nachreiner is very professional when I called about the sensor I was looking for. When I called again to check on shipping status, he was on top of it. He called me back once it was shipped. I am very happy with the professional service he has provided me, and the fast shipping. Definitely a 10 star service. Best company and best sales representative." -- Irene |
"Thanks again. Great customer service." -- David |
AAADM Inspection
Automatic door systems should be checked annually by an inspector who has been certified by the American Association of Automatic Door Manufacturers. Through that annual inspection, the door system can be checked for compliance with the latest industry standards. Also, automatic door systems should be given a daily safety check by premises owners. The American Association of Automatic Door Manufacturers provides details on how to conduct a daily safety check. Premises owners can use this guide to train or retrain employees to perform the daily safety checks properly. That helps assure safe operation of automatic doors. Additionally, all new sensors on pedestrian openings should also be properly adjusted by an AAADM certified inspector. If you are not a reseller or AAADM Certified, please contact us and we can provide you a list of local AAADM certified inspectors who can accurately make these adjustments to your new sensor(s). When properly installed, inspected annually by AAADM certified inspectors and safety-checked daily by premise owners, automatic doors consistently provide safe, convenient access for everyone.