
Motion Detector Sensors
-
The microStar M offers many features of the popular D38 it supersedes such as Human Presence Radar™ (HPR™), which offers unparalleled protection to even the slowest moving pedestrians from doors closing prematurely. The microStar M is the first motion sensor to feature an “installation mode.” In this mode, the installer can set the detection area without having to physically activate the door. Installation mode is especially valuable in times of bad weather, or when a large number of pedestrians are present. The microStar M fits 1¾” door frames, and includes visible LEDs to verify activation. Narrow and wide-pattern antennas are included, and the sensor offers multi-axis pattern adjustment (in/out and left/right). A wire harness is included to simplify (and quicken) installations. Like the D38, the microStar M can be set for unidirectional or bidirectional detection. (Supersedes prior units D7, D15 and D38)
Retail Price - $285 DoorSensors.com Price - $196
Hot Offer!
Order 4 or More at $174 each
Order 10 or More at $161 eachUniversal Mounting Bracket $25
Rain Cover $40 -
Sophisticated Motion Tracking Feature when energy conservation is critical. “3-D” adjustable antenna for precise positioning of the detection pattern . K-Band Microwave Technology . Exceeds ANSI standards and meets FCC req . Mounting height 10' - 17'. (10EAGLE, 10EAGLE1HM, 10ERA, 10ECA, 10EMB)
Retail Price - $270 DoorSensors.com Price Low Mount $179 - High Mount $199
Easy Programming Remote Control $49
Universal Mounting Bracket $25
Rain Accessory Cover $38
Recessed Ceiling Adapter $50 -
The Falcon is universally compatible with any industrial door. Can detect traffic moving both towards and away from your industrial door. Ability of disregarding pedestrians and only detect large masses. Capable of disregarding parallel traffic. Mounting height 11.5' to 23'. Falcon models available for lower mounting applications 7' to 11.5 and extended width pattern.
Retail Price - $469 DoorSensors.com Price - $299.61
Wide Pattern Version $311.61
Easy Programming Remote Control $49
100' Pre-Wire Cable $69Wide Pattern Version $311.61
Easy Programming Remote Control $49
100' Pre-Wire Cable $69 -
Award winning industrial door activation and hold open safety device. Wired into the door controller the SentryPost will detect forklifts, pallet jacks, people and other objects. Once detection occurs the door will be sent to the open position and remain open until detection ceases. Available as stand alone 40" bollard or clamp onto existing bollard 12" versions with one (1) OR (2) safety photoeyes. Photo eyes inside the bollard are adjustable so that the detection field can be more precise. The photo eyes used can also be adjusted to detect from 1′ to 10′ away. The eyes “see” through a narrow slot at the top of the bollard, +/- 36″ above the floor. Optional flashing yellow light on top cover activates when detection occurs and has an adjustable timer relay.
-
The Sparrow is designed to detect the movement of people and vehicles. Its unidirectional detection setting allows the Sparrow to only detect movement approaching the sensor, optimizing door operation. Its adjustable microwave antenna and 180º mounting provides flexibility in configuring the detection zone.
• Detects the movement of both pedestrian and vehicular traffic
• The unidirectional approach detection setting can be utilized for only detecting movement towards the sensor
• The bi-directional setting can detect motion in all directions
• The Sparrow’s unique unidirectional departure setting can be utilized to only detect movement away from the sensor
• Adjustable detection zones up to a maximum of 20 ft × 33 ft
• Flexible product mounting positions and adjustable antenna rotation (10SPARROW)Retail Price - $370 DoorSensors.com Price - $277
Easy Programming Remote Control $50 -
The ID20 is a long range microwave motion sensor for activating automatic industrial doors. Features include a speed selectable switch that makes the unit capable of detecting pedestrians and/or vehicles. Detection mode is selectable between approach-only or depart-only motion and the weatherproof housing makes it ideal for exterior applications. Microwave technology allows the ID20 to detect larger objects, such as fork trucks, up to 60 ft. away. Maximum pattern size is approximately 18 ft. wide at 60 ft. from the unit and is adjustable via a range potentiometer on the printed circuit board. The ID20 is not affected by air motion, change in temperature, humidity, color or background variations and is an ideal alternative to in-ground loop detectors.
Retail Price - $675 DoorSensors.com Price - $466
Heavy Duty Rain Cover $68 -
The HR-Robus is a microwave motion sensor for activating automatic industrial doors. Features include a speed selectable switch that makes the unit capable of detecting pedestrians and/or vehicles. Detection mode is selectable between approach-only, depart-only, or bi-directional motion and the weatherproof housing makes it ideal for installation in exterior applications. Microwave technology allows the HR-Robus to detect larger objects, such as forklift trucks, up to 26 feet away. Maximum pattern size is approximately 16.5 ft. wide at 26 ft. from the unit and is adjustable via programming. The HR-Robus is not affected by air motion, change in temperature, humidity, color or background variations.
Retail Price - $338 DoorSensors.com Price - $244
Hot Offer!
Order 10 or More at $194 each
Not sure which automatic door sensor is appropriate for your application? Please contact our experienced staff with any questions.

"They charge me about 50% more than your price for any sensor! For what? Betty is sending you an order for seven units." -- Russ |
"Your price is half of what we were quoted from those guys in Milwaukee! Please send two BEA Falcon HM units via UPS RED." -- Tim |
"The door company charged me almost $900 for one BEA Wizard!" -- Sherwood |
"Very prompt e-mail follow up about my order and better than I expected shipping. Also the prices are very good." -- Jim |
Ken Nachreiner is very professional when I called about the sensor I was looking for. When I called again to check on shipping status, he was on top of it. He called me back once it was shipped. I am very happy with the professional service he has provided me, and the fast shipping. Definitely a 10 star service. Best company and best sales representative. -- Irene |
AAADM Inspection
Automatic door systems should be checked annually by an inspector who has been certified by the American Association of Automatic Door Manufacturers. Through that annual inspection, the door system can be checked for compliance with the latest industry standards. Also, automatic door systems should be given a daily safety check by premises owners. The American Association of Automatic Door Manufacturers provides details on how to conduct a daily safety check. Premises owners can use this guide to train or retrain employees to perform the daily safety checks properly. That helps assure safe operation of automatic doors. Additionally, all new sensors on pedestrian openings should also be properly adjusted by an AAADM certified inspector. If you are not a reseller or AAADM Certified, please contact us and we can provide you a list of local AAADM certified inspectors who can accurately make these adjustments to your new sensor(s). When properly installed, inspected annually by AAADM certified inspectors and safety-checked daily by premise owners, automatic doors consistently provide safe, convenient access for everyone.